bannerny
Rotary Vibrator / Drilling Hose
Home > Products > Rotary Vibrator / Drilling Hose >

Product categories

hot Products

Long Radius Circulating Loop Ho

Long Radius Circulating Loop Ho

Cementing & Circulating Hoses are manufactured in variou

Plug Valve

Plug Valve

Plug valves- Low torque valve and repair kits provide by

Pup Joints

Pup Joints

Widely used in the acidic operating environment (excludi

Swivel Joints

Swivel Joints

The swivel joints are the common components in the well

Rotary Vibrator Hose 5000PSI Grade D (Kelly Hose)

  • Model No:

    Rotary Vibrator Hose 5000PSI Grade D
  • Material:

    Modified Nitrile
  • Size:

    2 1/2 - 5 inch
  • Imprint:

    Customized
  • Packing:

    Customized
 
  • Product Details


 

5,000 psi W.P. - 7,500 psi Test- Grade D- 12,500 psi Minimum Burst

Certification/Standards:
API Spec 7K--ISO 14693--ABS approval

Recommended For:
Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

Tube:
Modified Nitrile. 3/16” thick. Black. Specially designed for handling abrasive, corrosive and oily drilling mud.

Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.

Cover:
Modified Nitrile. Black. Specially designed Ultra abrasion cover is resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Couplings:
Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.

Temperature:
-4℉ to +180℉ (-20℃ to +82℃) continuous service.

Options:
Accessories such as safety clamps, hose lift eyes and stainless steel armor are available upon request.

Test:
Each hose is tested at 10000psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.

Specification:
Rotary Vibrator Hose 5000PSI Grade D (Kelly Hose) Specification


Product Show:
Rotary Vibrator Hose 5000PSI Grade D (Kelly Hose)

Advantages:
• Germany Lanxess HNBR as raw material.
  20% H2S and 80% oil based mud.
  Survive the extreme oilfield application requirements and has been no quality complaint for 5 years.
• Stainless steel 316L used as armored jacket.

Factory Workshop:
• SEJIN MACHINE from Korea.
  Suspension difference<70 MM, and the international standard is 120 MM.
• Mitsubishi electric control braiding machine.
  High accuracy data collection, real-time braiding angle monitoring and correction.




In general, the packing will be iron box or wooden box.

Rotary Vibrator Hose Packaging
Rotary Vibrator Hose Packaging


   Rotary Vibrator Hose certification


Request a free

Have A Question? You Can Call Us Or Email Us By Sending A Message Below.

Related Products

Rotary Vibrator Hose 5000PSI Gr

Rotary Vibrator Hose 5000PSI Gr

The test graph and certificate are available for each rotary

Rotary Vibrator Hose 5000PSI Gr

Rotary Vibrator Hose 5000PSI Gr

This hose can also be used as a Motion Compensator hose for s

Rotary Vibrator Hose 7500PSI Gr

Rotary Vibrator Hose 7500PSI Gr

Flexible connection between standpipe and swivel (Rotary Dril

Rotary Vibrator Hose 7500PSI Gr

Rotary Vibrator Hose 7500PSI Gr

Flexible connection between standpipe and swivel (Rotary Dril